We take a look at the Specialized S-Works Shiv time trial bike that Tony Martin has used throughout 2015 time trials

Tony Martin will be looking to take a fourth time trial title at the UCI Road World Championships on Thursday in Richmond, and the powerful German will be using the awesome looking Specialized S-Works Shiv to try and do it.

Though he’ll be representing Germany during the Worlds, he’ll be riding his Etixx – Quick-Step team issue machine that he used to place second in the first stage of the Tour de France in Utrecht this year.

4Z8A9884The bike comes with a custom paintjob, although nothing alluding to Martin’s Panzerwagon nickname. Instead the frame is adorned with a raging bull livery, with searing crimson eyes staring from the elongated tail of the head tube and nostrils snorting at the fork crown.

>>> Elite men’s World Championship time trial start list

tony martin specialized shiv 58t chainring

However the biggest talking point on this bike has to be that whopping 58 tooth FSA chainring, which, when engaged with an 11 tooth sprocket at the back, gives Martin the option of a massive 134 inch gear should he need it. The chainring is matched with FSA K-Force Light cranks and a Power2Max power meter.

>>> Tour de France bikes: Alex Dowsett’s Canyon Speedmax CF

tony martin specialized shiv saddle grip tape

Martin is obviously a rider with very particular demands, and there are a couple of other smaller modifications to make this bike fit for its rider. Most notably the Specialised TTS saddle is plastered with grip tape to make sure that Martin’s backside stays firmly on place though his time trial effort. This is a setup which causes a lot of increased wear on the team’s skinsuits, so for training purposes the strips are covered with smoother blue tape.

>>> Tour de France bikes: Fabian Cancellara’s Trek Speed Concept

There is also grip tape wrapped around the wings of the aero bars – a similar material to what you’d find on skateboards. We can’t imagine that this is particularly comfortable, but it will help to keep Martin’s hands in place when braking even with sweaty palms.

specialized shiv tony martin

The Di2 setup means that the cable holes just behind the stem can be covered over, allowing slightly smoother airflow at the front end.

tony martin specialized shiv brakes

The brakes are Specialized’s own aero brakes, not the Shimano Dura-Ace options you’d normally find with bikes adorned with Shimano Dura-Ace Di2.

These are positioned in the standard place on the fork at the front while the rear ones are under the bottom bracket, and come with a dual pivot centre-pull design that apparently creates less drag than standard brakes.

specialized clincher tyres tony martin

The wheels are Visions at both ends, with a Metron Disc at the rear, and a Metron 55 at the front. Interestingly these are clad with Specialized 26mm clincher tyres with cotton casing – not the tubulars that the majority of the peloton will be running.

garmin mount tony martin specialized  shiv tt

Final touches include a Garmin computer mount jutting out from the side of the left aero bar, and a K-Edge chain catcher.

  • Jakob Thomsen

    Any suggestions?

  • Jakob Thomsen

    Where does the rear breaking cable run? Normally it’s the third cable behind the cockpit…… But there isn’t any….