Vitus Mach 3 Disc review

Vitus's Mach 3 Disc hybrid uses a variant of that used by its Razor dropped bar bike. We've tested how it rides around the town and out into the countryside.

Cycling Weekly Verdict

Well specified and comfortable hybrid bike, but the very wide bars make city manoeuvring tricky

Reasons to buy
  • +

    Rides well

  • +

    Good, consistent stopping power from the hydraulic disc brakes

  • +

    Can fit mudguards and racks

  • +

Reasons to avoid
  • -

    Very wide bars

  • -

    Quite basic hand grips

  • -

You can trust Cycling Weekly. Our team of experts put in hard miles testing cycling tech and will always share honest, unbiased advice to help you choose. Find out more about how we test.

Vitus is the bike brand of Chain Reaction Cycles and is sold direct from Chain Reaction’s website. It sells a wide range of bikes in different categories, including four ranges of dropped bar road bikes, the lowest spec of which is the aluminium Razor.

The Mach 3 is the highest spec hybrid bike in Vitus’s four-bike flat bar range and is made of the same materials as the Razor, with an alloy frame and carbon forks with an alloy steerer. The carbon forks are a nice touch which should help reduce road buzz over a steel or alloy model.

Vitus_mach 3_371

All cables travel externally to the frame. Carbon fork is a nice feature

Its geometry is similar to the Razor too, with quite a short head tube, leading to a ride position which isn’t too upright and has a significant drop from saddle to bars. The sloping top tube makes getting on and off the bike and standing at lights easy too.

Unlike the Razor, the Mach 3 comes with disc brakes - like many of today's best hybrid bikes. Its M280 Auriga hydraulic brakes are effective and drama free both when descending and in the stop-go of urban traffic.

>>> Disc brakes: everything you need to know

Kenda Kwest tyres handle rough surfaces well

Kenda Kwest tyres handle rough surfaces well

The Mach 3 rolls on Vitus’s own brand wheels. They’re stiff enough and not too heavy and come with Kenda Kwest 28mm tyres.

There’s enough air volume that these can be run at lower pressures for a bit of extra comfort on uneven city streets or broken back road surfaces and Kenda claims good puncture protection.

They roll well too and the tread pattern will cope with most road conditions and the Kendas provide plenty of grip. The wheels are quick release front and rear.

>>> How to buy a new bike: a 12 point plan

There’s also enough clearance around the frame to run mudguards (which aren’t included). You can fit a rear rack too as there are mounting bolts on the seatstays. The bike comes with two sets of water bottle cage mount bolts if you need to carry drinks with you on your ride.

Tektro Auriga hydraulic disc brakes are effective stoppers

Tektro Auriga hydraulic disc brakes are effective stoppers

The Mach 3’s gearing is Shimano Claris. With 8 speeds and an 11-28 cassette at the rear coupled with a 50/34 double chainset, there’s a reasonable range of gears, although I did find that with the bike’s heft I was on the bottom of the range once I hit any significant upward gradients. The chainset has a guard around the large ring – useful to protect your trouser legs if you’re riding to work in your civilian clothes.

>>> Strava sees nearly 80,000 commutes logged on Global Bike to Work Day

Watch: five commuting tips

Vitus’s saddle is a comfortable perch, with enough padding to keep you comfortable on longer rides. The sloping frame geometry means that there’s plenty of extension of the alloy seatpost which also adds to comfort.

>>> Benefits of cycling to work outweigh damage caused by pollution, study claims

The bars on the Mach 3 are huge. They come in at just under 70cm wide, so you ride in a very arms-out position. It takes a bit of getting used to after a road bike and potentially limits your ability to squeeze through narrow gaps.

Bars on the Mach 3 are very wide at 695mm

Bars on the Mach 3 are very wide at 695mm

Along with the relatively short head tube it also means that you end up leant forward on your arms when riding and putting quite a bit of weight on your hands.

This is means that you don’t get too much wind resistance, as the position isn’t too different from an endurance bike with dropped handlebars.

It also means that you can adopt a fairly aero, elbows out position on fast downhills. It might not impress Chris Froome, but it does mean that you can get up a reasonable turn of speed.

>>> Lose weight through cycling: Lighter and faster in four weeks

Own brand saddle is comfortable

Own brand saddle is comfortable

I did find the weight on my arms quite tiring and hard on my wrists after an hour or so of riding though. The hand grips are effective but not very well padded; it would be worth swapping them for something with a bit more shock absorption built in.

Fortunately, this is an upgrade which isn’t too costly and otherwise the Mach 3 provides an attractive option both for commuting and leisure rides, as well as light touring, if you don’t fancy dropped bars.

Thank you for reading 20 articles this month* Join now for unlimited access

Enjoy your first month for just £1 / $1 / €1

*Read 5 free articles per month without a subscription

Join now for unlimited access

Try first month for just £1 / $1 / €1

Paul Norman

Paul started writing for Cycling Weekly in 2015, covering cycling tech, new bikes and product testing. Since then, he’s reviewed hundreds of bikes and thousands of other pieces of cycling equipment for the magazine and the Cycling Weekly website.

He’s been cycling for a lot longer than that though and his travels by bike have taken him all around Europe and to California. He’s been riding gravel since before gravel bikes existed too, riding a cyclocross bike through the Chilterns and along the South Downs.