Shimano 105 pedals review

Shimano 105 pedals are a quality entry point into Shimano’s clipless road pedal tech

Shimano 105 pedals
(Image credit: Cycling Studio)
Cycling Weekly Verdict

The Shimano 105 pedals may be the workhorse of Shimano’s pedal range, but they benefit from a carbon composite body, like Shimano’s pricier options, and have excellent longevity. You get multiple float options and plenty of adjustability to release tension too.Shimano 105 pedals

Reasons to buy
  • +

    Very durable

  • +

    Excellent bearings

  • +

    Adjustable release tension

  • +

    Multiple float options

  • +

    Low maintenance

  • +

Reasons to avoid
  • -

    Quite expensive at full RRP

You can trust Cycling Weekly. Our team of experts put in hard miles testing cycling tech and will always share honest, unbiased advice to help you choose. Find out more about how we test.

The PD-5800 model of the Shimano 105 pedals share many of the features of the more expensive Dura-Ace and Ultegra versions.

Although they’re third level down the Shimano road pedal hierarchy, the Shimano 105 pedals benefit from the brand’s trickle down from its higher end models. 105 pedals are more akin to older versions of Dura-Ace and Ultegra, as both have recently been upgraded slightly.

>>> Shimano grouspsets compared

Shimano switched to carbon composite pedal bodies for 105 some years ago, like Ultegra and Dura-Ace. There’s a wide stainless steel plate over the centre of the pedal body to cope with wear. Even after thousands of miles’ use, there’s little sign of wear.

Shimano uses the same engagement mechanism across its entire SPD-SL road pedal range. This consists of a front pedal section that engages with the front of your pedal cleat.

>>> How to cycle with clipless pedals

At the rear, there’s a sprung clip which engages with the rear of the cleat to hold it in place. The spring is totally enclosed, so it’s not prone to the weather. You just need to lubricate the pivot points occasionally.

Pushing down with your shoe engages the cleat in the pedal and twisting your shoe sideways releases it. Engagement tension is adjustable with an allen key, to suit your riding style. In practice, even on its lightest setting, your foot is unlikely to slip out accidentally.

Shimano 105 pedals

Shimano pedals come packed with a set of yellow cleats
(Image credit: mike prior)

If you’re new to clipless pedals, engagement and disengagement can be nerve-wracking. But flipping over the pedal when you start off and taking your foot out when you come to a halt will quickly become second nature.

The pedal system is designed so that you can have a small amount of side to side float for your shoe. How much you have is determined by the cleat selected. Shimano makes a yellow cleat with 6 degrees of float, a blue one with 2 degrees and a red one with no float. Which works for you will depend on your pedalling style.

>>> The best clipless pedals

Cyclists usually aim for a low stack height for their pedals, but Shimano sells spacers to fit between the shoe and the cleat to alter the spacing. These might be useful if you have one leg longer than the other.

Shimano’s cleats are not as prone to wear as some of its competitors’ models, like Look’s, so you can expect plenty of mileage out of a set, even if you walk a lot in your cycling shoes. You should replace them once the coloured parts are worn down or engagement becomes tricky though.

http://www.youtube.com/watch?v=e2BXOkM-wHs

Shimano cleats are wider than Look’s so they can seem a bit unwieldy on the bottom of flashy cycling shoes.

The Shimano 105 pedals come packaged with a set of yellow cleats. Replacement cleats are readily available. Shimano also sells cleat covers, to reduce cleat wear when walking and reduce the risk of slipping on smooth, hard or damp surfaces.

>>> How to pedal efficiently

Shimano 105 pedals run on a steel spindle and cartridge bearings. You need an 8mm allen key to screw them on and off your cranks (the left pedal has a left handed thread). There are no facets to use a spanner.

>>> Watch: how to service your Shimano SPD-SL pedals

You can service your Shimano 105 pedal bearings yourself if you want. But even without maintenance, they’ll run smoothly for years, without developing play. Although the £110 list price of Shimano 105 pedals looks quite expensive, they’ll give you years of use and can usually be found selling at a substantial discount if you hunt around.

Thank you for reading 20 articles this month* Join now for unlimited access

Enjoy your first month for just £1 / $1 / €1

*Read 5 free articles per month without a subscription

Join now for unlimited access

Try first month for just £1 / $1 / €1

Founded in 1891, Cycling Weekly and its team of expert journalists brings cyclists in-depth reviews, extensive coverage of both professional and domestic racing, as well as fitness advice and 'brew a cuppa and put your feet up' features. Cycling Weekly serves its audience across a range of platforms, from good old-fashioned print to online journalism, and video.